Emptying bills/coins
1. Scan the manager code at the kiosk
2. Connect using the phone number and the one-time code sent by SMS
3. Click on the Empty notes button
4. In the upper part of the screen you can see the number of bills that are available for change in the station
In the lower part of the screen, select the number of bills that you want to leave in the station
You can add a note to the documentation of the operation using the virtual keyboard
5. After performing the empty action, remove the banknote box, and the coin mechanism from the cash position
6. Count the bills and coins and report the amount that came out of the Take Money Out operation
7. Make sure that the amount remaining in the station corresponds to the amount displayed in the system in the Total Amount field
If there is a discrepancy between the amounts, it should be reported to the support team.
Entry of bills/coins into the position
1. Scan the manager code at the kiosk
2. Connect using the phone number and the one-time code sent by SMS
3. Click the Put Money In button
4. Click the Enable Acceptors button
5. Insert the money through the banknote and coin readers
6. Click Disable Acceptors
7. If money was put in, the money must be reported by the action Put Money In
Please note, in the case of a withdrawal from the position, the money inserted should not be reported.
Check the money inside the station
In order to check the count of money that available to change in the station,
1. Scan the manager code at the kiosk
2. Connect using the phone number and the one-time code sent by SMS
3. Click on the "Count" button
Please notice, The count of the coins is not exact.
The data based on sensor that count the coins
Back from the management interface to the kiosk Home page
At any stage, you can click the Back To Kiosk button